< Master index Index for omviz >

Index for omviz

Matlab files in this directory:

 ContentsOcean Modeling Vizualization Tools (OMVIZ)
 ReadmeThis is a collection of m-files to manipulate,
 allmeanfunction allmean(cdf1,cdf2,tind,tout);
 arrowsfunction [h]=arrows(x,y,w,fac,color)
 clegend4CLEGEND4 Plot color bar legend below a plot.
 cmeanfunction cmean(cdfin,cdfout,varin,tind,tout)
 contents.1Extracting scalar data from NetCDF model output
 ctotalCTOTAL computes to total amount of tracer present in a given time
 depaveDEPAVE computes the depth-averaged value of a 4D variable at
 depaveuvDEPAVEUV computes the depth-averaged value of velocity at
 depmaxDEPmax computes the depth-maxraged value of a 4D variable at
 dolandscape
 doportrait
 ecom_depaveuvECOM_DEPAVEUV computes the depth-averaged value of velocity at
 ecom_isliceECOM_ISLICE returns a vertical slice along i=iindex
 ecom_jsliceECOM_JSLICE: returns a vertical slice along j=jindex, ECOM file
 ecom_ksliceECOM_KSLICE: returns horizontal slice at particular layer.
 ecom_zsliceECOM_ZSLICE Returns a matrix containing a horizontal slice at a specified depth
 ecom_zsliceuvZSLICEUV Returns a matrix containing a horizontal slice at a specified depth
 ecomdemom-file to show a few examples of extracting data
 ecomelevfunction [e,jd]=ecomelev(cdf,i,j)
 ecomhffunction [e,jd]=ecomelev(cdf,i,j)
 ecomtauECOMTAU returns wind stress from 4D ecomsi.cdf type files.
 ecomtimeECOMTIME Julian time data from POM.CDF or ECOM.CDF type file
 ecomtsecomts extracts a velocity time series from a 4D netCDF ECOM output file.
 ecomvelECOMVEL extracts a velocity time series from a 4D netCDF ECOM output file.
 emeanfunction emean(cdfin,cdfout,tind,tout)
 fiddlegridscript for fiddling model_grid
 freshthickfunction [f,x,y]=freshthick(cdf,tind,s0);
 freshtotFRESHTOT computes to total amount of fresh water present in a given time
 get_tsdataFUNCTION: Get_TSData()
 gmaxfunction xnew=gmax(x)
 gminfunction xnew=gmix(x)
 greg2strGREG2STR Converts Gregorian time array to String
 gregaxdGREGAXD Labels the current x-axis with Gregorian labels in units of days,
 gregaxhGREGAXH Labels the current x-axis with Gregorian labels in units of hours,
 gregaxisGREGAXIS Convert numeric XTickLabels to date strings.
 gregaxmGREGAXM Labels the current x-axis with Gregorian labels in units of months,
 gregaxyGREGAXY Labels the current x-axis with Gregorian labels in units of years.
 gregorianGREGORIAN Converts digital Julian days to Gregorian calendar dates.
 hfmeanHFMEAN averages the heat flux over time steps TIND
 hms2hHMS2H converts hours, minutes, and seconds to hours
 isliceISLICE: returns horizontal slice at particular layer.
 jsliceJSLICE: returns horizontal slice at particular layer.
 julianJULIAN Converts Gregorian calendar dates to corresponding
 ksliceKSLICE: returns horizontal slice at particular layer.
 ksliceuvKSLICEUV
 mcagtMCAGT Get the values of a NetCDF attribute.
 mcdinqMCDINQ Inquire about a NetCDF dimension.
 mcdumpMCDUMP is a more terse form of the NetCDF utility 'ncdump'.
 mcvgtMCVGT Get a NetCDF hyperslab.
 nearNEAR finds the indices of x that are closest to the point x0.
 nearxyNEARXY finds the indices of (x,y) that are closest to the point (x0,y0).
 plotstaPLOTSTA Plots time series output locations on map
 pomdemoPOMDEMO an m-file to show a few examples of extracting data
 pslicePSLICE Like Pcolor, but centered on grid cells, and includes a legend.
 pslice2PSLICE2 Just like pslice, but no color legend bar is drawn
 psliceuv
 readgridREADGRID reads the ECOM "model_grid" file
 replaceFUNCTION REPLACE finds all the elements of matrix X that are equal to A, and
 s2hmsS2HMS converts seconds to integer hour,minute,seconds
 scrum_ctotalCTOTAL computes to total amount of tracer present in a given time
 scrum_depaveuvECOM_DEPAVEUV computes the depth-averaged value of velocity at
 scrum_ftotalftotAL computes to total amount of fresh water present in a given time
 scrum_isliceISLICE returns a vertical slice along i=iindex from a SCRUM file
 scrum_jsliceSCRUM_JSLICE: returns a vertical slice along j=jindex, SCRUM file.
 scrum_ksliceSCRUM_KSLICE: returns horizontal slice at particular layer.
 scrum_zsliceSCRUM_ZSLICE: Returns horizontal slice from SCRUM Netcdf file.
 scrum_zsliceuvSCRUM_ZSLICE Returns a matrix containing a horizontal slice of velocity
 sp2gcSP2GC State Plane (or whatever coordinates the model
 sp2gc2SP2GC State Plane (or whatever coordinates the model
 stacklblfunction stacklbl(axhandle,titl,ylab,[x,y]);
 swstateSWSTATE State equation for seawater
 taumeanfunction taumean(cdfin,cdfout,tind,tout)
 tindTIND finds index of Julian day array closest to the specified Gregorian time
 tmeanfunction tmean(cdfin,cdfout,tind,tout)
 tsTS Reads a scalar variable at a particular station from TSEPIC.CDF files.
 ts2TS Reads a scalar variable at a particular station from TSEPIC.CDF files.
 tselevTSELEV reads elevation time series from TSEPIC.CDF style files
 tshfTSELEV reads elevation time series from TSEPIC.CDF style files
 tslocTSLOC shows locations of time series stations on map of bathymetry
 tsrichTSRICH calculates gradient Richardson Number from TSEPIC.CDF files
 tstauTSTAU Reads time series of wind from TSEPIC style files
 tsvelTSVEL Reads velocity variable at a particular station from TSEPIC.CDF files.
 tsvel2TS Reads a scalar variable at a particular station from TSEPIC.CDF files.
 uvp_masksfunction [umask,vmask,pmask]=uvp_masks(rmask) %
 vmeanfunction vmean(cdfin,cdfout,tind,tout)
 w100W100 calculates bottom velocity at 1 m above bottom from ECOM.cdf files
 zsliceZSLICE: Returns horizontal slice from SCRUM or ECOM Netcdf file.
 zsliceuvZSLICEUV: Returns horizontal velocity slice from SCRUM or ECOM Netcdf file.

Other Matlab-specific files in this directory:


Generated on Thu 01-Dec-2005 08:50:34 by m2html © 2003