References Cited

Bartz, R., Zanereld, J.R.V., and Pak, H., 1978, A transmissometer for profiling and moored observations in water: Proceedings, Society of Photo-Optical Instrument Engineers, v. 160, p. 102-108.

Beardsley, R.C., 1987, A comparison of the vector-averaging current meter and new Edgerton, Germeshausen, and Grier, Inc., vector-measuring current meter on a surface mooring in Coastal Ocean Dynamics Experiment 1: Journal of Geophysical Research, v. 92, p. 1845-1859.

Butman, B., Dalyander, P.S., Bothner, M.H., and Lange, W.H., 2007, Time-Series photographs of the seafloor in western Massachusetts Bay, Version 1, 1989 - 1993: U.S. Geological Survey Data Series 265, DVD-ROM. Also online at http://pubs.usgs.gov/ds/265/.

Butman, B., and Folger, D.W., 1979, An instrument system for long-term sediment transport studies on the continental shelf: Journal of Geophysical Research, v. 84, p. 1215-1220.

Coté, J.M., Hotchkiss, F.S., Martini, M.A., Denham, C.R., Ramsey, A.L., Ruane, S., 2005, Acoustic doppler current profiler data processing system manual: U.S. Geological Survey Open-File Report 00-458, Version 3. Online at http://pubs.usgs.gov/of/of00-458/.

Danforth, W.W., 1990, The Seadata Program: W.H.O.I. Technical Report WHOI-90-44. Woods Hole Oceanographic Institution, 24 p.

Gilboy, T.P., Dickey, T.D., Sigurdson, D.E., Yu, X., and Manov, D., 2000, An intercomparison of current measurements using a vector measuring current meter, an acoustic doppler current profiler, and a recently developed acoustic current meter: Journal of Atmospheric and Oceanic Technology, v. 17, no. 4, p. 561-574.

Halpern, D., 1987, Comparison of upper ocean VACM and VMCM observations in the Equatorial Pacific: Journal of Atmospheric and Oceanic Technology, v. 4, p. 84-93.

Hosom, D.S., and Butman, B., 1979, The Sea Data 651-4 datalogger: W.H.O.I. Technical Memorandum No. 6-79, Woods Hole Oceanographic Institution, 92 p.

Irish, J.D., Plueddemann, A.J., and Lentz, S.J., 1995, In-situ comparisons of moored acoustic Doppler profilers with conventional VACM and VMCM current meters: nstitute of Electrical and Electronics Engineers Fifth Working Conference on Current Measurement, Proceedings, St. Petersburg, Fl., Institute of Electrical and Electronics Engineers, p. 59-64.

Lentz, S.J., Butman, B., Williams, A.J., III, , 1995, Comparison of BASS and VACM current measurements during STRESS: Journal Atmospheric and Oceanic Technology, v. 12, p. 1328-1337.

Martini, M.A.,and Strahle, W.J., 1993, Multi-sensor oceanographic measurement system for coastal environments: Sea Technology, v. 34, no. 9, p. 49-53.

Martini, M.A., and Williams, A.J., III, 1994, Benthic Acoustic Stress Sensor (BASS)--Electronics check-out procedures: U.S. Geological Survey Open-File Report 93-722, 37 p.

Martini, M.A., Sherwood, C.R., Horwitz, R., Ramsey, A., Lightsom, F.L., Lacy, J., Xu, J., 2007, Hydratools: A MATLAB® based processing package for Sontek Hydra data: U.S. Geological Survey Open-File Report 2005-1026, CD_ROM. Also online at http://pubs.usgs.gov/of/2005/1026/.

McCullough, J., 1975, Vector-averaging current meter speed calibration and recording technique: WHOI Technical Report 75-44, Woods Hole Oceanographic Institution, 35 p.

Moody, J.A., Butman, B., and Bothner, M.H., 1987, Near-bottom suspended matter concentration on the Continental Shelf during storms: Estimates based on in situ observations of light transmission and a particle size dependent transmissometer calibration: Continental Shelf Research, v. 7, p. 609-628.

Morrison, A., Williams, J., and Martini, M., 1993, Calibration of the BASS acoustic current meter with carrageenan agar: Institute of Electrical and Electronics Engineers-Oceanic Engineering Society (IEEE-OES), OCEANS '93, Proceedings, v. 3, p. 143-148.

Peterson, A.M., and Gregg, M.C., 1979, Development of a small in situ conductivity instrument: International Electrical and Electronics Engineering, Journal of Oceanography Engineering, OE-4, p. 69-75.

Scotti, A., Butman, B., Beardsley, R.C., Alexander, P. Soupy, Anderson, S.P., 2005, A modified beam-to-earth transformation to measure short-wavelength internal waves with an Acoustic Doppler Current Profiler (ADCP): J. Atmospheric and Oceanic Technology, v. 22, no. 5, p. 583-89.

Strahle, W.J., Butman, B., 1984, Modification of EG&G vector averaging current meter to record light transmission and water conductivity: U.S. Geological Survey Open-File Report 85-106, 27 p.

Strahle, W.J. Worrilow, S.E., Fucile, P.D., and Martini, M.A., 1994, New recording package for VACM provides sensor flexibility: Institute of Electrical and Electronics Engineers-Oceanic Engineering Society (IEEE-OES), Proceedings, OCEANS '94 Conference, v. 1, p. 391-396.

Sullivan, C., Warner, J.C., Martini, M., Lightsom, F.L., Voulgaris, G., and Work, P., 2006, Wave data processing toolbox manual: U.S. Geological Survey Open-File Report 2005-1211, 86p.

Weller, R.A., and Davis, R.E., 1980, Vector measuring current meter: Deep-Sea Research, v. 27, no. 7A, p. 565-582.

Return to Top

Go to Next Topic